Safety In The Workshop

Any discussion of woodworking machinery should begin with shop safety. And of course, hand tools require safety precautions as well. Woodworking machines are made to cut, chop, abrade, slice, drill and shave materials that are considerably harder then human skin. When used carelessly, machines are dangerous and when used properly, machines can be a tremendous help.

Woodworkers all too often share stories of accidents and near misses. Perhaps the term “accident” is misleading here because “accident” implies the injured person is a “victim” of circumstances beyond their control. In most cases, these accidents are a result of carelessness and can be avoided by taking a few precautions.

Awareness of safety is the first requirement of good craftsmanship. Here are several things you can do to protect yourself while working with wood, either with woodworking machines or hand tools.

• Always wear certified hearing and eye protection when using saws, routers, sanders and other equipment. To keep splinters and dust out of your eyes, use large plastic safety goggles, a face shield or safety glasses.
• Goggles – the rigid lenses of safety goggles are surrounded by a soft plastic frame that fits and seals against the contours of your face. The sides are ventilated to prevent condensation and they can be worn over prescription eye glasses.
• Hearing protectors – earplugs and padded ear muffs protect your hearing from overexposure to excessive noise. Always wear protectors when using noisy power tools that could cause long-term damage to your hearing.
• Keep your workshop area clean and neat so you won’t trip over a scrap of wood or an extension cord at an inconvenient moment.
• Tie up long hair, and absolutely do not wear loose-fitting clothing or any jewelry. These items can get caught in the machines and drag you towards the blades or other sharp parts.
•  Do not operate machinery when you are tired or have consumed alcohol – any amount of alcohol can slow down your reflexes and impair your judgment. Woodworking machinery is dangerous enough when you are fully alert, so why increase the odds of an accident?
• Focus on what you are doing and always take a break if you mind starts to wonder or you start feeling tired. You are most likely to have an accident when performing the same operation over and over again. Walk away for a few minutes between cuts.
• If you are not comfortable making a cut or aren’t sure if a particular cut is safe, get advice or help before you try it. Find a fellow woodworker to consult with or search the internet.
• Always keep saw blades sharp. The harder you have to push, the less control you have over the wood. This can cause slips resulting in loss of fingers or limbs.
• Be prepared for accidents.
  
  Consider these questions:

1. Where is your telephone?
2. Where is your first aid kit? – You should always have an extensive first aid kit available at all times.
3. Where is the nearest person who can help you? – You should never be alone while woodworking.
4. Can you give clear directions to your shop over the telephone?
5. Are you familiar with basic tourniquet and first-aid techniques?

If a serious accident does occur, call 911, not your friend. Your friend will not be able to help you if you suddenly go into shock on the way to the hospital.

If you should be unfortunate as to sever any fingers, take them with you to the hospital in case they can be reattached. Severed fingers should be wrapped in gauze and soaked in a cup of salty water that is kept cold in ice; the fingers should never touch the ice.